Windows 10: Updates KB4103722, KB4103720 and more

[English]Microsoft has released new updates for Windows 10 versions 1607 and 1703 as of May 17, 2018. In addition to the updates KB4103722 and KB4103720 there are also service stack updates. Here are the details of these updates.


Advertising


Updates foür Windows 10 Version 1607

For Windows 10 version 1607 (Anniversary Update) and Windows Server 2016 a cumulative update and a servicing stack update have been released.

Update KB4103720 for Windows 10 Version 1607

Cumulative update KB4103720 is available for Windows 10 Version 1607 (Anniversary Update) and Windows Server 2016. It changes the OS Build to 14393.2273 and is a quality update that addresses the following items:

  • Addresses additional issues with updated time zone information. 
  • Addresses an issue that causes Internet Explorer dialogs on a second monitor to also appear on the primary monitor when using extended display. 
  • Addresses an issue that prevents adding performance counters to the Performance Monitor on systems with many processors. 
  • Addresses an issue that causes sporadic authentication issues when using Windows Authentication Manager. 
  • Addresses an issue that causes BitLocker to go into recovery mode when updates are applied. 
  • Addresses an issue that can cause excessive memory usage when using smart cards on a Windows Terminal Server system. 
  • Addresses an issue that makes it impossible to revert to a virtual machine checkpoint. Reapplying the checkpoint fails with an error. 
  • Enables the Visual Studio IntelliTrace step-back feature to take snapshots of an application whose debug platform target is set to x86. 
  • Ensures that CPU Groups function properly. 
  • Addresses an issue where querying the Hyper-V Dynamic Memory Integration Service\Maximum Memory, Mbytes performance counter always returns 0 instead of returning the maximum configured RAM for a VM. 
  • Addresses an issue that causes a VM to throw an error after creating the VM with static memory. This occurs when you enable HYPER-V and disable NUMA in the BIOS on a physical machine that has more than 64 logical processors. The error is “The data is invalid. (0x8007000D)”, and the VM fails to start. 
  • Addresses an issue with ADFS that causes an IdP-initiated login to a SAML relying party to fail when PreventTokenReplays is enabled. 
  • Addresses an issue where PolicySOM (WMI policy provider) consumes all available dynamic ports on UDP, which causes affected machines to become unresponsive. The component that doesn’t close the sockets properly is the LDAP client. 
  • Addresses an issue where an NDES server connection to ADCS sometimes doesn’t automatically reconnect after the ADCS server restarts. If this occurs, new devices won’t be issued certificates without restarting the NDES server. 
  • Addresses an ADFS issue that occurs when OAUTH authenticates from a device or browser application. A user password change generates a failure and requires the user to exit the app or browser to log in. 
  • Addresses an issue where enabling Extranet Smart Lockout in UTC +1 and higher (Europe and Asia) did not work. Additionally, it causes normal Extranet Lockout to fail with the following error:

    Get-AdfsAccountActivity: DateTime values that are greater than DateTime.MaxValue or smaller than DateTime.MinValue when converted to UTC cannot be serialized to JSON.

  • Addresses an issue where disks that have been blacklisted or marked as bad will be ignored and not be repaired when a user invokes S2D Repair. The Repair-S2D cmdlet will now work on a single node when the -RecoverUnboundDrives parameter isn’t passed. 
  • Addresses an issue that causes docker builds to fail with the error message “hcsshim::ImportLayer failed in Win32: The system cannot find the path specified.” 
  • Addresses an issue where Windows 10 clients that authenticate to 802.1x WLAN access points fail to apply Group Policy permissions, run scripts, or retrieve roaming profiles at user logon. This occurs because Kerberos authentication fails for \\domain\sysvol, \\domain\netlogon, and other DFS paths.
  • Addresses an issue with default applications that reset for browsers on server platforms.

The update is offered via Windows Update as soon as you start an update search. A manual download is possible via Microsoft Update Catalog. The update is cumulative and installs only those parts that have not yet arrived on the machine with previous updates.

Note: Windows 10, version 1607, reached end of service on April 10, 2018, so this update isn’t offered for Windows 10 Home or Pro editions. Windows 10 Enterprise and Windows 10 Education editions will receive six months of additional servicing at no cost. Devices on the Long-Term Servicing Channels (LTSC) will continue to receive updates until October 2026. Also systems with clover trail SoC will receive updates until 2023 (see Windows 10 support for Clover Trail machines till 2023).

When installing both the servicing stack update (SSU) KB4132216 and the latest cumulative update (LCU) from the Microsoft Update Catalog, install the SSU before installing the LCU.

Known issue

Reliability issues have been observed during the creation of shielded VMs and the required artifacts for their deployment. There are also reliability issues for the Shielding File Wizard with or without the SCVMM interface. Existing shielded VMs and HGSs are not affected. Microsoft is working on a resolution and will provide an update in an upcoming release.


Advertising

Servicing Stack Update KB4132216 for Windows 10 Version 1607

Update KB4132216 for Windows 10 Version 1607 is a Servicing Stack Update (SSU), which should bring stability improvements. The update is automatically rolled out via Microsoft Update Catalog, but can also be downloaded from the Microsoft Update Catalog. The update is also offered via WSUS.

Updates for Windows 10 Version 1703

For Windows 10 version 1703 (Fall Creators Update) a cumulative update and a servicing stack update have been released.

Update KB4103722 for Windows 10 Version 1703

Cumulative update KB4103722 for Windows 10 Version 1703 (Fall Creators Update) changes the OS Build to 15063.1112. This quality update addresses the following items:

  • Addresses additional issues with updated time zone information. 
  • Addresses an issue that causes Internet Explorer dialogs on a second monitor to also appear on the primary monitor when using extended display. 
  • Addresses a reliability issue in .NET applications when using a Japanese IME in a text box. 
  • Addresses an issue with the connection status of some Bluetooth devices. 
  • Addresses an issue that prevents Autodiscover in Microsoft Outlook 2013 from being used to set up email accounts when UE-V is enabled. 
  • Addresses an issue that prevents adding performance counters to the Performance Monitor on systems with many processors. 
  • Addresses an issue that generates an error when attempting to change the smart card service’s startup type from Disabled to Manual or Automatic. The error is “Cannot create a file when that file already exists.” 
  • Addresses an issue that causes sporadic authentication issues when using Windows Authentication Manager. 
  • Addresses an issue that causes client applications that use Windows Authentication Manager to stop working when making a request to the server. 
  • Addresses an issue that causes BitLocker to go into recovery mode when updates are applied. 
  • Enables the Visual Studio IntelliTrace step-back feature to take snapshots of an application whose debug platform target is set to x86. 
  • Addresses an issue where the connection bar is missing in Virtual Machine Connection (VMConnect) when using full-screen mode on multiple monitors. 
  • Addresses an issue where Windows 10 clients that authenticate to 802.1x WLAN access points fail to apply Group Policy permissions, run scripts, or retrieve roaming profiles at user logon. This occurs because Kerberos authentication fails for \\domain\sysvol, \\domain\netlogon, and other DFS paths. 
  • Addresses an issue that causes UWP applications to stop working when they use the XAML Map Control.

The update is available via Windows Update as soon as you start a search. A manual download is possible via Microsoft Update Catalog . The update is cumulative and installs only those parts that have not yet arrived on the machine with previous updates.

If the Servicing Stack Update (SSU) KB4132649 and the last cumulative update (LCU) from the Microsoft Update Catalog are to be installed manually, the Servicing Stack Update must be installed first.

Servicing Stack Update KB4132649 for Windows 10 Version 1703

Update KB4132649 for Windows 10 Version 1703 is a Servicing Stack Update (SSU) that brings stability improvements. The update is available via Windows Update, via WSUS and may be downloaded fromMicrosoft Update Catalog.

Similar articles:
Microsoft Office Patchday (May 1, 2018)
Adobe Flash Player Update to Version 29.0.0.171
Microsoft Security Update Summary for May 8, 2018
Windows 10 security updates May 8, 2018
Patchday: Updates for Windows 7/8.1/Server May 2018
Patchday Microsoft Office Updates (May 8, 2018)
Patchday: More Microsoft updates May 8, 2018


Advertising


This entry was posted in Update, Windows and tagged , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *